01
On the exterior
The vapour-open wind and moisture layer helps vapour leave the insulation while shielding the assembly from external moisture and air movement.
- A1 · 25 g/m²
- A2 · 50 g/m²
- A3 · 90 g/m²
Complete building protection
A system for managing moisture through the building envelope
Izoterm Izospan combines roll materials that protect insulation from external moisture and wind with an internal layer that limits the flow of water vapour from occupied spaces.
A
A series — vapour-open wind and moisture protection for the outer layer
- 24–90g/m² weight
- 1600mm width
- 35–70m² per roll
The protective envelope
Two layers. One purpose
Select a material by its position and task in the assembly, not by the letter in its name alone.
02
On the interior
The vapour-control layer limits humid indoor air from entering the insulation and structural layers.
- B1 · 24 g/m²
- B2 · 35 g/m²
- B3 · 60 g/m²
Applications
For the building's main assemblies
The final layer build-up and installation method must follow the project design and applicable building regulations.
Insulated pitched roofs
Moisture management on both sides of the thermal insulation.
Timber-frame walls
Exterior wind protection and interior vapour control.
Externally insulated walls
Protection for the insulation against air movement and external moisture.
Ventilated facades
A protective layer behind the facade cladding.
Attic and intermediate floors
Reduced moisture exposure for insulation and timber elements.
Floors and lower decks
Control of vapour and moisture movement for the service conditions.
Project selection
Start with the assembly
A reliable solution comes from the coordinated performance of every layer, not from a single roll in isolation.
- 01type of construction to protect
- 02layer position relative to insulation
- 03required vapour permeability
- 04mechanical load during installation
- 05temporary exposure to sunlight
- 06roll area and installation pace
This page provides general guidance. Final selection must be based on project calculations and the manufacturer's technical documentation.
Made in Shymkent
From web formation to the finished roll
The production line covers polymer web formation, layer bonding, slitting, winding and packaging of the finished material.
- production control of weight and width
- printed and unprinted options
- UV-stabilised versions
- 35, 50, 60 and 70 m² rolls
Partner enquiry
Let's work together
Become an official dealer or discuss another partnership format with MARVIK PARTNERS.
office@marvik-partners.kz